UV HDPE precision folding masker
Masking paper tape, precision folding masking tape
COVFLM-ADHSTR-UV-PRECISION-140CMX33M
Register now and access more than 125,000 products
Very thin and soft tearing paper
- Enables extremely precise bonding
- Crisp, sharp and super-flat paint edges without running paint
- Particularly fine paint edges without running paint
- Special paper ideal for both solvent- and water-based paint systems
Special acrylate adhesive offers great adhesion and allows gentle bonding to sensitive surfaces in the construction and automotive sectors, such as wallpapers, furniture and chrome trims, with residue-free removal.
High-quality, static, corona-treated HDPE film
- Good adhesion to most substrates due to electrostatic charge
- Prevents paint from flaking off or running uncontrollably
- Can be torn off in a straight line by hand
The UV resistance of this product is up to four months, which ensures maximum safety even in the case of bonding outdoors.
- The tape must be pulled off when dry
- Not suitable for use on carbon, zinc, lead (also lead-based paint), copper, anodised metals, natural stone (marble etc.) or aged or weathered PVC.
- Exercise caution with paints containing zinc or zinc oxide, since residues may be left.
- On critical substrates such as parquet, laminate, linoleum or other surfaces that will be visible later, adhesive residues or surface tearing cannot be ruled out.
- When grouting tiles with sealant, the tape must be removed before the drying process is complete as otherwise the tape will be difficult to remove.
Datasheets(X)
Masking work for painting applications, especially with sensitive surfaces and masking outdoors.
Masking work for painting in the automotive and metalworking sectors, especially with sensitive surfaces. Excellently suited for oven drying.
Masking in glazing technology.
To ensure optimal adhesion, the surface must be cleaned before use. The surface should be dry and free from dust, oil, solvents or other chemicals. Unroll the adhesive tape from the roll and press it firmly onto the desired surface. Then unfold the film.
Do not leave the adhesive tape on the substrate for longer than the time specified or it may leave a residue. After drying, remove the tape evenly and carefully at a 45° angle.
Adhesive tape backing material | Tear paper |
Foil backing material | Polyethylene |
Adhesive base | Acrylate |
Colour | Yellow (base material), Transparent (film material) |
Length of roll | 33 m |
Width (opened out) | 140 cm |
Foil thickness | 9 µm |
Thickness of adhesive tape | 87 µm |
Adhesive force on steel (per unit of length) | 1.7 N/cm |
Elongation at break | 3 % |
Min./max. processing temperature | 5 to 40 °C |
Max. temperature resistance | 100 °C |
Conditions for temperature resistance/temperature conditions | max. 20 minutes |
Moisture resistance | Yes |
Ultraviolet resistance | 4 months, outdoor weathering |
Resistance against | Weather |
Max. usage duration | 4 Month |
Shelf life from production/conditions | Unlimited / cool, dry and frost-free storage area that is protected from UV rays |