Special undercoating - UBS-SPECIAL-BLACK-500ML

Special undercoating - UBS-SPECIAL-BLACK-500ML - 1

Special undercoating - UBS-SPECIAL-BLACK-500ML - 2

Special undercoating

Name: Special undercoating
Brand: Würth
SKU: 0892078550

UBS-SPECIAL-BLACK-500ML

Art.-no. 0892078550

EAN 4062856412990

All versions

Similar products

Individual price display after login

Special undercoating

Art.-no. 0892078550

Individual price display after login

Quantity

Show availability in Würth shop

Exclusively for trade customers

Locate shop
Login/Register
Call customer service: 014/44.55.66

Water-vapour-permeable undercoating for use on wooden underbodies

Excellent adhesion to wood

Tested compatibility with commercially available

wood impregnation compounds

Excellent anti-humming effect

No run-off on vertical surfaces

High resistance to ageing

Notice

Store the product in a cool, dry place. Recommended storage temperature +10 °C to +30 °C. Protect from direct sunlight. Product can be removed again after application with thinner. Once dried, the product can be removed again only by mechanical means. After use, turn the can upside down and spray until the valve is empty.

Application area

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Special undercoating for use on wooden underbodies of caravans, motor homes, trailers etc. Moisture exchange in wood is ensured by the breathable properties of the undercoating. The penetration of moisture and other environmental influences is prevented.

Instructions

Shake can well before using. The surface must be dry, clean and free from rust and grease. Optimal spraying distance 30 cm. With thicker coats, allow intermediate coats to flash off.

Chemical basis	Mix naphtha, solvent, propellant
Surface pre-treatment required	Surface must be clean, dry and free from rust and grease.
Contents	500 ml
Weight of content	406 g
Colour	Black
Min. proportion of solids	33 %
Min./max. temperature resistance	-25 to 80 °C
Conditions for through drying	at 20°C, 65% relative humidity
Min. spraying distance	30 cm
Conditions for skin-formation time	20°C, Ri 0 at 65% relative humidity, 100 µ wet layer thickness
Min. skin-formation time	75 min
Drying time	135 min
Conditions for drying time	at 20°C and 65% relative humidity
Density	0.79 kg/l
Density conditions	at 20°C
Shelf life from production	24 Month
Max. temperature resistance	80 °C
Min. temperature conditions	-25 °C
Min. temperature resistance	-25 °C
Recoatable/Can be painted over	No

Additive article:

Product

Description

Quantity

Price
/PU

Spraymaster spray can attachment

ATTCH-SPRCAN-F.PNTSPR-SPRAYMASTER

Art.-no. 0891090

The practical attachment for your spray cans

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

- Prices with a green star are defined as condition prices for you - Prices with a purple star are temporary special promotions - If there is no star in the state this is a standard price. - If you want to change something in your price settings go to My Account> Price Settings

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Disposable glove Nitrile Grip Comfort

Description:

Permeation level: 0

Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside

Disposable gloves, nitrile, extra strong, type A

Description:

Permeation level: 0

Durable and robust disposable gloves with excellent chemical protection

Chemical cut protection glove W-310 Level D

Description:

Permeation level: 1

Very robust, liquid-proof protective glove that combines optimal cut protection with chemical protection

Vinyl chemical and moisture protective glove

Description:

Permeation level: 3

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 3

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove

Description:

Permeation level: 1

With cotton velour finish inside.

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 1

Chemical protective glove nitrile with backing fabric

Description:

Permeation level: 1

Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.