Roof hooks adjustable 3-ways Aluminium
Roof hook, aluminium, 7 mm hole in base
ROOFHOK-ALU-ADJ-CLMP35X7-PL100X95MM
ZEBRA
Register now and access more than 125,000 products
Low weight
Flexible thanks to the possibility of height/lateral adjustments
- Variable rib height in roof batten area
- Lateral adjustment in roof batten area
- Height adjustment in rail area: Up to 20 mm
Fluting on bar
Optimum positive and non-positive fit
Entirely pre-assembled
Mounting rail 39x37, 47 x 37 and 60 x 37 can be attached to the roof hook without any preliminary work
Maximum load values without using the roof tile as support
- Pressure parallel to roof surface: 0.7 kN
- Pressure perpendicular to roof surface: 1.5 kN
- Tensile force perpendicular to roof surface: -1.5 kN
We recommend using three DIN 571 wood screws, 6 x 100 mm, A2 stainless steel, or alternatively three ASSY pan head wood screws, 6 x 80 mm or 6 x 100 mm, A2 stainless steel, to attach each roof hook to the rafters. Please observe edge and axial clearances in accordance with general technical approval.
Base hole diameter | 7 mm |
Material | Aluminium |
Surface | Plain |
Baseplate width | 95 mm |
Baseplate length | 100 mm |
Adjustment range | 65 mm |
Product weight (per item) | 479.850 g |
Bar height | 45 - 60 mm |
Required number of wood screws | 3 PCS |
Material number | Aluminium, EN-AW-6082 T6 |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
