Mulit-purpose grease III
GRSE-(MULTIGREASE III)-FDGRD-400G
Register now and access more than 125,000 products
- Can be used in areas in which food is processed or stored.
- Good adhesion.
- Squeeze-stable and oxidation-resistant.
- Supports the quality of the seal.
- Dust- and water-repellent.
- Free from resin, acids and silicone.
This product is NSF H1 registered (135924). The registration confirms that the product meets the requirements of the NSF programme for lubricants that may come into contact with food, where such contact is technically unavoidable.
Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed!
Datasheets(X)
Physiologically non-hazardous, colourless grease with multi-functional additive combination for lubricating and protecting seals, jointed and moving parts in which there is a risk of direct contact between the lubricant and foodstuffs.
Clean the lubricating point thoroughly before filling for the first time. Fill the bearing house up to about halfway. Observe the bearing manufacturer specifications. Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used. If using the product as a corrosion-protection film, it must be removed completely before the device is put back into operation.
Weight of content | 0.4 kg |
Container | Cartridge |
Soap base | Inorganic |
Lubricant code | KP2N-20 |
Min./max. temperature conditions | -15 to 130 °C |
Colour | Transparent |
NLGI grade/conditions | 2 / with DIN 51818 |
Base oil viscosity, kinematic/conditions | 200 mm²/s / at 40°C |
Min./max. worked penetration /conditions | 265 x 0.1 mm-295 x 0.1 mm / in accordance with DIN ISO 2137 |
Corrosion protection period/category | Corrosion category 0 |
VKA welding load | 2200 N |
Shelf life from production | 24 Month |
Oil basis | Medical white oil |
Behaviour in the presence of water/conditions | 0-90 / in accordance with DIN 51807-1 |
Lubricant system | Grease |
Smell/fragrance | Characteristic |
Density | 0.88 g/cm³ |
Density conditions | at 20°C |
Conditions for viscosity of oil basis | at 40°C |
Min. temperature conditions | -15 °C |
Max. temperature conditions | 130 °C |
Max. short-term temperature resistance | 150 °C |
Worked penetration conditions | in accordance with DIN ISO 2137 |
Conditions for NLGI grade | with DIN 51818 |
Corrosion protection period conditions | in accordance with DIN 51802, SKF Emcor test |
Conditions for VKA welding load | in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines) |
Resin-free | Yes |
Silicone-free | Yes |
Acid-free | Yes |
AOX-free | Yes |
Free from heavy metals | Yes |
Chloric | No |
Resistance against | Water, Salt water, Acid, Lye |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!