Light filler
FILR-GAP/JOINTFILLER-WHITE-310ML
Register now and access more than 125,000 products
- Ready-to-use for fast application
- Minimal shrinkage to prevent cracking
- Easy to paint over with emulsion paints
- Easy to sand with 200 μm, grain content max. 1 %
Please note that these values merely serve as empirical values. It should also be noted that the curing time is longer for thicker joints.
Datasheets(X)
The light filler is suitable for filling joints, cracks and holes in walls and ceilings (e.g. gypsum plasterboard, acoustic panels). Small uneven areas in surfaces on walls can also be compensated, such as those that become visible when scraping off wallpaper. Can also be used in model construction.
The base material must be clean, dry and free from dust and grease. Using a cartridge or spatula, apply and spread the light filler to the joint, crack or hole. With joints, the protruding joint compound can be cut away with a utility knife after approx. 15-20 minutes. For more information, please refer to the technical data sheet.
Chemical basis | Acrylate dispersion |
Density | 0.57 g/cm³ |
Viscosity/consistency | Pasty |
Min./max. processing temperature | 5 to 30 °C |
Min./max. curing time | 6-8 h |
Grain size | 200 µm |
Colour | White |
Contents | 310 ml |
Container | Cartridge |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Max. temperature resistance of the hardened material | -15 °C |
Min. curing time | 6 h |
Max. curing time | 8 h |
Curing time conditions | depending on layer thickness |
Recoatable/Can be painted over | Yes, after 15-20 minutes |
Additional articles | Cartridge gun, art. prefix no. 0891... |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!