Welcome to Würth Belux Only for professionals
Hot melt adhesive 102 - MLTADH-102-DENTLIFTER-500G Hot melt adhesive 102 - MLTADH-102-DENTLIFTER-500G
Hot melt adhesive 102 - MLTADH-102-DENTLIFTER-500G - 1
Hot melt adhesive 102 - MLTADH-102-DENTLIFTER-500G - 2

Hot melt adhesive 102

Hot melt adhesive 102
MLTADH-102-DENTLIFTER-500G

Art.-no. 0890100057
EAN 4024835558488
All versions

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

High-strength hot melt adhesive for effective dent removal on different materials and surfaces.
  • Good thermostability

  • Short processing and setting times

  • Waterproof and resistant to UV and ageing
Notice

Heat occurring during storage (e.g. due to solar radiation) must be avoided due to the changes to the outer shape of the hot melt adhesive this can cause.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

High-strength hot melt adhesive that is ideal for the automotive industry for effective dent removal on different materials and surfaces by affixing pulling tabs.

Instructions

The adhesive surfaces must be free from dust, dirt, moisture, grease and release agents. Softeners in plastics and paints can impair the durability of the adhesive. Apply the hot melt adhesive as a spot, film or bead and immediately press the parts together. Briefly applying pressure increases the strength.



Dent removal with dent lifter set:


  • 1. Clean the dent with a suitable cleaner

  • 2. Apply hot melt adhesive in the centre of the suitable adapter.

  • 3. Affix adapter at deepest point and if necessary cool with pneumatic air.

  • 4. Hook slide hammer or PinPuller into the adapter and reshape the dent.

  • 5. After removing the dent, use a plastic wedge to slightly lift the hot-melt adhesive at a certain point. Spray adhesive remover spray (art. no. 0893 141) into the gap and allow to take effect.

  • The adhesive remover spreads into the gaps and loosens the adhesive residue from the surface.

  • 6. The adhesive residue is removed from the surface in one piece in a matter of seconds.

  • If necessary, remove any residual adhesive residue with the pre-cleaner (art. no. 0893 200 1).

Weight of content

500 g

Chemical basis

Compound of polymer and natural resin

Colour

Yellow

Length

200 mm

Diameter

11.5 mm

Density/conditions

0.93 g/cm³ / at 20°C

Viscosity

3.24 Pas

Softening point

91 °C

Min./max. open time

15-40 s

Min./max. processing temperature

180 to 220 °C

Shelf life from production

24 Month

Adhesion

0 - not applicable

Silicone-free

Yes

Solvent-free

Yes

Number of pieces

25 PCS

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Hot glue gun HKP 220
Hot glue gun HKP 220

HOTGLUGUN-EL-HKP220

MASTER
Especially powerful glue gun, ideal for all installation, repair, fixing and decoration work
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

- Prices with a green star are defined as condition prices for you - Prices with a purple star are temporary special promotions - If there is no star in the state this is a standard price. - If you want to change something in your price settings go to My Account> Price Settings
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Adhesive remover spray
Adhesive remover spray

ADHREM-150ML

Easily removes hardened hot-melt adhesive from the paint surface
Pre-cleaner
Pre-cleaner

PRECLNR-ADH-1LTR

Specially tailored cleaner for plastics, painted metal surfaces and glass parts
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

- Prices with a green star are defined as condition prices for you - Prices with a purple star are temporary special promotions - If there is no star in the state this is a standard price. - If you want to change something in your price settings go to My Account> Price Settings
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details