Contact Clean adhesion promoter
Adhesion promoter clear primer
PRIM-WNDWADH-(CONTACT-CLEAN)-PAD
Register now and access more than 125,000 products
- Transparent adhesion promoter for Revolution window adhesive
- Activator for trimming (remaining bead) and PU/PVC pre-coated windows
Product provides no UV protection. Please do not wipe off. Shake the container well before opening.
Datasheets(X)
All windscreens/windows in the car replacement glazing sector for passenger cars and small vans. Pre-treatment of window when replacement glazing is used (ceramic-coated).
Surfaces must be fully dry, clean and grease-free. To do so, clean the bonding surfaces with an active cleaner. Shake Contact Clean adhesion promoter before use. The Contact Clean can then be applied. Guide pad, art. no. 0890024515: The pad is activated by briefly bending the handle (slight click). The content is applied using the textile side (red) over the perforated ceramic area. One application is sufficient. The window adhesive can be applied once it has fully flashed off (15 minutes). For more information, please refer to the technical data sheet.
Container | Pad |
Contents | 1.1 ml |
Chemical basis | Naphtha |
Colour | Transparent |
Min. flash-off time | 15 min |
Flash-off time conditions | at 23°C and 50% relative humidity |
Min. processing temperature | 5 °C |
Max. processing temperature | 25 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!