Welcome to Würth Belux Only for professionals

12 V Li-Ion COMPACT Jump starter

Jump starter 12V Li-ion COMPACT
JUMPSTRT-MOB-12V-LIION-COMPACT

Art.-no. 0772070100
EAN 4065746331043

Prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Powerful jump starter/booster with charging cradle for mobile use in the workshop or on the road

Easy and quick charging


  • The charging cradle connected to the mains allows easy and fast charging of the booster

  • The booster is always charged and ready for use when necessary

  • The charging cradle has a USB-C connector

  • Quick charging of the jump starter possible in 2.5 h with optional accessory power supply


Optimal operation


  • The charger clamps are selected based on geometry and a low pivot point, so that they can be optimally operated by all hand sizes and hand strengths

  • The clamp tips are kept flat so that even in narrow places the clamps still have safe and optimal contact with the battery terminals

  • The connection cable length including 60 cm clamps enables a connection distance of 120 cm

  • Good illumination of the application area by powerful LED light with 300 lumens, optionally 100 % or hazard flashing mode


Robust design and safe operation


  • Robust housing with matt plastic surface

  • Multiple fuse/protection guarantees safe operation

  • Integrated carry handle for maximum portability

  • Intuitive operation thanks to clear and minimalist LED display
Notice

The override mode must be used with extreme caution and only with deeply discharged batteries as battery detection, spark protection and reverse polarity protection are switched off!



Booster for use with the following battery types:


  • Open

  • Wet

  • MF - maintenance-free

  • VRLA

  • AGM

  • Gel

  • EFB and EFB+

  • Calcium
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Petrol/diesel engines with a 12 V battery supply

  • Displacement for petrol engines up to 8 litres and diesel engines up to 6 litres

  • Vehicles, lorries, cars, motorcycles, boats, caravans, tractors, mowers etc.

  • In the workshop or on the road
Instructions

1. Switch off the vehicle and remove the ignition key


2. Connect the switched-off and charged jump starter


3. Connect the red plus clamps to the battery plus and then the black minus clamps to the vehicle earth


4. Switch on the jump starter and start the vehicle


5. Turn off the jump starter


6. Remove the black minus clamp and then the red plus clamp

Suitable for max. cubic capacity

8 l

Rechargeable battery/battery capacity

3750 mAh

Max. current

2000 A

Nominal current

440 A

Width x height x depth

25.3 x 18.6 x 17.3 cm

Type of rechargeable battery/battery

Li-lon

Rechargeable battery/battery permanently installed

0 - not applicable

Number of rechargeable batteries/batteries

1 PCS

Material of housing

0 - not applicable

Colour

0 - not applicable

Length (battery charging cable with terminals)

60 cm

Fully insulated charging terminals

Yes

Reverse-polarity protection

Yes

Spark protection

Yes

Overvoltage protection

Yes

Display

0 - not applicable

12 V Li-Ion COMPACT Jump starter including:
0 x
USB-C 60 W charger

CHRG-POWERSUPPLY-(TYPE-C)-EURO-1,7A-20W

Description: Powerful power supply with USB-C connector and quick charging cable
Quantity: 0 x
Charging station
0 x
Charging station

CHRGSTA-FOR-0772070100-A-0772150100

Description: For 12 V Li-Ion COMPACT Jump starter and Jump starter 12V Li-Ion POWER
Quantity: 0 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

- Prices with a green star are defined as condition prices for you - Prices with a purple star are temporary special promotions - If there is no star in the state this is a standard price. - If you want to change something in your price settings go to My Account> Price Settings
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
USB-C 60 W charger

CHRG-POWERSUPPLY-(TYPE-C)-EURO-3A-60W

Powerful power supply with USB-C connector and quick charging cable
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

- Prices with a green star are defined as condition prices for you - Prices with a purple star are temporary special promotions - If there is no star in the state this is a standard price. - If you want to change something in your price settings go to My Account> Price Settings
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information