1-component primer acid For sanded-through areas and paint buildup
1C etch primer
PRIM-FILR-MIDDLGREY-SR-400ML
Register now and access more than 125,000 products
- Simple, time-saving application
- Excellent corrosion protection
- Good coverage properties, fast drying
Do not work over with polyester and EP products. After use, turn the can upside down and spray until the valve is empty.
Datasheets(X)
Steel, zinc-plated steel, plain sheet metal, hardened coats of paint, spare part priming, aluminium, polyester and glass-fibre reinforced plastic.
The surface must be clean, dry and free from grease. Sand the surfaces. Shake the can well for at least 2 minutes before use. Perform a spray test. Perform 2-3 (30-50 µm) spray passes at a distance of 20-30 cm. Observe the intermediate flash-off time (5 min.). Can be painted over with all common top-coat systems.
Contents | 400 ml |
Chemical basis | Synthetic resin |
Available colours | Medium grey |
Colour | Medium grey |
Processing temperature | 20 °C |
Min. drying time | 20 min |
Max. drying time | 60 min |
Conditions for drying time | at 20°C |
Max. coating thickness | 50 µm |
Density | 1.07 g/cm³ |
Min. spraying distance | 20 cm |
Density conditions | at 20°C |
VOC concentration (CH) | 670 g/l |
Max. spraying distance | 30 cm |
Min. proportion of solids | 23.6 % |
Shelf life from production | 15 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!